Skip to product information
1 of 2

Somfy

Somfy Motor - Altus 50 RTS 6/17 3M -White Cable

Somfy Motor - Altus 50 RTS 6/17 3M -White Cable

Regular price $525.00 AUD
Regular price $657.00 AUD Sale price $525.00 AUD
Sale Sold out
Tax included. Shipping calculated at checkout.

Information:

  1. 230V / 50Hz tubular motor.
  2. Suitable for a wide range of application types.
  3. Built-in radio receiver with Somfy’s rolling code.
  4. Electronic limit setting via remote control.
  5. Turning capacity limited only by thermal time.
  6. Suitable for tubes from Ø50.
  7. Memory Capacity: 12 channels / transmitters, plus 3
    sensors.
  8. Programmable “my” position.
  9. Requires the use of a crown and wheel for tube adaptation.
  10. Horizontal mount only.
  11. Intermittent Usage.

 

Technical Data:

  1. L1 (mm): 605
  2. L2 riveting distance (mm): 590
  3. Torque (Nm): 6
  4. Speed (rpm): 17
  5. Rated Voltage (V): 230
  6. Rated Power consumption (W): 90
  7. Rated Current (A): 0.45
  8. Running time before thermal cut off (min): 4
  9. Thermal cut off temp (°C): 140
  10. Average running noise (dbA): 47
  11. Minimum tube diameter: 50 x 1.5
  12. Motor weight (kg): 1.72
  13. Cable length (M): 3
  14. Number of cores in cable: 3
  15. Cross section of cable (mm²): 0.75
  16. Index Protection: 44

Paid Pickup (Malaga, WA)

Noted: If you opt for local pickup, kindly make the purchase online first. We will notify you when the item is ready for collection. Usually, it will be immediately available, but in the case of stock shortages, it may take a few days to restock. Please wait for our confirmation before coming.Please be aware that walk-in purchases will be subject to the retail price. If you wish to receive the same price as the online store, kindly place your order online

Shipping & Returns

SHIPPING

  • Most products are shipped via Express Post, some products may not be eligible for air freight due to restrictions imposed by Australia Post, so they will be sent via Regular Post. 
  • For most of the products, the Postage fee is AUD 15 (per order whether for 1 item or several items) is added to the cart, however, for some items that are too large, there'll be a charge of AUD 25, the most accurate postage fee will be shown after you add the shipping address during the checkout section.
  • Express Post to anywhere in Australia, allow 1-3 business days for delivery after shipped.
  • Regular Post to anywhere in Australia, allow 2-6 business days delivery after shipped.
  • Posted direct from the Shutter Master Australia Factory/Warehouse in WA.
  • Within 48 hours of receiving your completed payment.
  • You will be notified via email once shipped.

     

    WARRANTY and RETURNS
    Shutter Masters Australia is committed to providing quality products to our customers. If for any reason you are not completely satisfied with any product supplied by us, please contact us by emailing contact@shuttermasters.com.au within 7 days of receiving the goods.


    You must:

    • Include your Name, Address and Tax Invoice number in the email.
    • Provide a clear and detailed description of the problem you are experiencing.
    • No product is to be returned without authorisation and an accompanying CUSTOMER CLAIM FORM issued by Shutter Masters Australia.
    • Return packaging must be of sufficient quality to protect the goods in transit.
    • You are responsible for ANY return costs of the goods back to Shutter Masters Australia.
    • Different products have varying warranty periods generally stated on the product description page.
    • Upon return Shutter Masters Australia technicians will inspect and test the component and will repair or replace the item and ship it back to you.
    • Guarantees do not apply if you got what you asked for but simply changed your mind, found it cheaper somewhere else, decided you did not like the purchase or had no use for it.



    In addition to manufacturers’ guarantees on selected products, Shutter Masters Australia and its suppliers provide a guarantee of acceptable quality on every product, by law. You are entitled to a replacement or refund for a major failure, and to compensation for other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality but the failure does not amount to a major failure. This refund policy is not intended to exclude or limit any rights which you may have under the Competition and Consumer Act 2010 (Cth) or equivalent State or Territory laws.


    Warranty

    The following are exclusions from warranty, subject always to the Consumer Law:

    1. Shutter Masters Australia only obligation shall be to repair or replace, with the least possible delay, defective equipment which does not conform to the warranty without any other indemnity relating to installation and re-installation or consequential damages.
    2. Shutter Masters Australia shall not be liable for any injury, loss or damage, direct or consequential, arising out of the use of, or the inability to use, the equipment. Before using, the Buyer and/or the end User shall determine the suitability of the product for its intended use, and User assumes all risks and liability in connection therewith.
    3. The articles that are replaced pursuant to the terms of this warranty shall be retained by Shutter Masters Australia.
    4. All costs related to installation and re-installation of the Shutter Masters Australia equipment covered by this warranty are not the responsibility of Shutter Masters Australia.
    5. The user is responsible for any freight costs relating to repair or replacement.
    6. Shutter Masters Australia will not be responsible for any consequential damages during or following installation procedures.
    7. If the buyer resells any Shutter Masters Australia products to another buyer or end-user, it shall include all of the terms and provisions of this warranty in such resale. Shutter Masters Australia responsibility to any such third party shall be no greater than Shutter Masters Australia responsibility under the warranty to the original Buyer.
    8. If written specifications are not properly applied by the Buyer with regards to size and weight limitations.
    9. If Shutter Masters Australia material has been used to perform functions other than the function it was designed to handle, namely enclosing domestic window openings
    10. If Shutter Masters Australia material is used with componentry and/or accessories that have not been previously approved in writing by Shutter Masters Australia.
    11. If Shutter Masters Australia is requested by the Buyer to use any customized colors or to over coat materials then this will void warranty on Roller Shutter Coatings
    12. If Shutter Masters Australia is requested by the Buyer to insert other profiles into a shutter (i.e. AE 401 into AR 401) then this will void the shutter due to the incompatibility of profiles
    13. If the defect is a result of alteration, accident, misuse abuse or neglect.
    14. Deterioration due to normal fair wear and tear.
    15. Damage from weather and/or the environment including hail, wind, rain, lightening, flood, salt and similar.
    16. Please Note: All Somfy® motors and mechanical accessories supplied by Shutter Masters Australia carry the Somfy® Five (5) Year Limited Warranty. All Somfy® controllers and electrical accessories supplied by Shutter Masters Australia carry the Somfy® Two (2) year Warranty.
    View full details

    Customer Reviews

    Be the first to write a review
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)

      Technical Support

      If tackling your home repair project on your own proves challenging, opting for professional assistance can be a wise choice. Our team of experts is readily available to offer guidance and support:

      To enlist the help of our professionals for your home repair needs, simply visit their website to request roller shutter repair services

      (Please note that technician services are currently limited to Perth Metropolitan Area only.) 

      Request a Service